HC019V Motion Sensor Tri-Level Control, Condomnium Function

In many cases, several sensors are connected together to control the same fixture, or to trigger on each other, the sudden on/off may cause huge magnetic pulse and mis-trigger the sensor. Hytronik condominium sensor HC019V is specially designed for these applications with 1-10V output which employes a strong software to overcome the megnatic interferences.

Functions and Options

In a lot of buildings, there is a need that the moving object in corridor or undercover garage can trigger a transmitter luminarie with connected receiver luminaries from more than one direction. Every transmitter luminaries (containing the sensor) should be able to trigger the whole installation whether it’s an on/off or dimming installation.

See the example below that there are several exits /entrances to the corridor, no matter which sensor at exit /entrance is triggered, the luminaries in the group will light up.

Technical Data

Mains Voltage 220~240VAC
Stand-by power <0.8V
Warming-up 20s
Load ratings 800W – Capacitiv Load
2000W – Resisitv Load
Sensor Priciple High Frequency (Microwave)
Operation frequency 5.8GHz +/-75MHz
Transmission power <0.2mW
Detection Range Max. (OxH): 12m x 6m
Detection Angel 30 ~ 150 Degrees
Settings adjustments
Sensitivity 10% / 50% 75% / 100%
Hold time 5s/30s/1min/5min/10min/20min/30min, can be customized
Daylight treeshold 2~50Lux, disable, can be customize
Stand-by period 0s ~ 1h, +∞ (Selecteble)
Stand-by dimminglevel 5% / 10% / 20% / 50%
Operation temperature -35 ~ +70 Degree Celcius
IP Rating IP20
Certicication Semko, CB, EMC, CE, R&TTE, SAA

Wiring Diagram


Anmäl dig till vårt nyhetsbrev

Jag godkänner att denna webbplats lagrar och bearbetar mina uppgifter enligt vår integritetspolicy. *