HCD418 Led DALI Sensor Hytronik

HCD418 is a 1-10V ballast/driver is being replaced by DALI ballast/driver. This sensor contains a DALI power supply circuit, which gives DALI output to the driver to carry out the sensor on/off and dimming command.


Operating voltage 120-277VAC
Max. Switched power 30mA (15 devices)
Standby power <1w
Detection area [ 10 | 50 | 75 | 100 ]%
Warmming-up time 20s
Hold time 2s |30s | 1min |5min |10min | 20min | 30 min
Daylight threshold 2~50Lux | Disable
Standby period 0s | 10s |1min | 5min | 10min | 30min | 1H |+ infinity
Standby dimming level [ 5 | 10 | 20 | 50 ]%,
Microwave frequency 5.8GHz+/-75MHz
Microwave power <0.2mW
Detection range Max.(O x H):12m x 6m; where O is the detection angle
Detection angle 30~150 Degrees
Mounting height 6m
Operating temperature -35~ +70 Degree Celsius
IP rating IP20 | IP65 only when used with Hytronik HC-IP65
Certification Semko, CB, EMC, CE, R&TTE, SAA

Mechanical structure

Wiring diagram


Anmäl dig till vårt nyhetsbrev

Jag godkänner att denna webbplats lagrar och bearbetar mina uppgifter enligt vår integritetspolicy. *